Accessories - Labconco SteamScrubber 4010010 Series User Manual

Accessories

This screen contains the list of all accessories currently installed on the Glassware
Washer. The screen displays the state (Enabled/Disabled) of each accessory. The
Status can be switched ON or OFF to Enable or Disable the accessory. Accessories
can be turned off, for instance if the washer is not connected to pure water, the Pure
Water can be disabled. If the pure water connection is pressurized the Pure Water
Pump can be turned off to increase the flow rate of pure water into the washer.
Reference Fig. 6-27.
The following accessories may be displayed and enabled/disabled from the Accessories
Screen:
 Pure (DI) Water Pump
 Pure (DI) Water
 Detergent 1 (optional accessory)
 Rinse Aid 1 (optional accessory)
 Conductivity (optional accessory)
 LED Light (only available on window washer models)
To enable/disable an accessory, touch the toggle to change between ON/OFF. See
Fig. 6-27.
Figure 6-27
66