Display - Labconco SteamScrubber 4010010 Series User Manual

Display

This screen provides settings for the display screen functionality. Reference Fig. 6-20.
Brightness Slider
Touch Sounds
audible beeps when the screen is touched.
Screen Timeout Function
mode) when no screen touches have been detected for the allotted time (defined
in the Screen Timeout dropdown menu). Touching the Screen Timeout Function
toggle will between ON & OFF.
Screen Timeout
hours.
– Adjust the display brightness by dragging the bar left/right.
– Touching the toggle between ON & OFF with enable or disable
– If enabled, the screen will go to sleep (low power
– This value can be set to 5, 10, 15, 30 min, and 1, 2, or 3
Figure 6-20
59