View Data File - Labconco SteamScrubber 4010010 Series User Manual

View Data File

1. From the Data Log Screen, highlight the Log to view by touching the Log name.
2. Touch [View].
3. Six columns showing data from six user-defined data points will be displayed.
4. Swipe the screen up or down to scroll through the data.
5. Select [Bottom]
6. Select [Top]
7. Select Most Recent First
8. Select the Customize
data shown in the any of the six columns. See Fig. 6-10. Less than six data
columns can be displayed; however six is the maximum number for display.
9. Select the Information
table showing the code definitions.
to snap to the bottom of the log file.
to snap to the top of the log file.
to display the newest data at the top of the log file.
icon at the bottom right corner of the screen to change the
Icons by the Alarms or Step code headers to display a
Figure 6-10
49
Lock