4: Installation; Unpacking - Labconco SteamScrubber 4010010 Series User Manual

4: Installation

With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:
 Unpack and move the equipment
 Connect hot water supply
 Connect the pure water supply
 Connect the drain
 Connect electrical service
 Install the equipment

Unpacking

The following tools are required to unpack and install the equipment:
 Box knife
 9/16" wrench
 Flat-blade screwdriver
 Phillips screwdriver
 5/16" nut driver
 Carpenter level
The following safety precautions must be followed by all personnel unpacking the
equipment.
 Wear safety glasses
 Wear gloves
 No loose fitting clothes
 Wear close-toed shoes
 The cartoning allows for lifting with a mechanical lift truck or hand truck. If you
must lift the washer manually, use at least two (2) persons and follow safe lifting
guidelines.
22