Removing Or Adjusting The Upper Rack; Remove The Upper Rack; Replace The Upper Rack; Raise The Upper Rack Height - Labconco SteamScrubber 4010010 Series User Manual

Removing or Adjusting the Upper Rack

The upper rack is easily raised or lowered to accommodate different size glassware.
The upper rack may also be removed from the Glassware Washer to facilitate loading
the rack outside the washer or to allow very tall glassware to be loaded and washed on
the lower rack. See Fig. 7-1.

Remove the upper rack

 Slide the upper rack all the way out of the washer.
 Grasp the handles on each side of the rack, lift one side of the rack while putting
slight pressure toward the opposite side of the rack. Once the rack clears the
slide bracket slots, raise the rack off the opposite slide.

Replace the upper rack

 The upper rack can be replaced by pulling each slide all the way out of the
washer. Hold the rack by the handles above the slides making sure the rack's
water inlet adapter is facing to the back of the washer, lower one side of the rack
into the top position of the slide bracket rack seats. Once the rack is seated on
one side, continue to lower the opposite side of the rack down to rest in the slide
bracket seat.
 The rack can then be moved to the lower position if required.

Raise the upper rack height

 To raise the rack to the upper position, slide the upper rack all the way out of the
washer.
 Grasp the handles on each side of the rack, lift the rack straight up while putting
slight outward pressure on the rack. Let the rack bracket slots guide the rack to
the top of the slots. Holding the slide in position with your index fingers push the
rack forward in positon on the upper rack bracket seats. Make sure the rack pins
are setting securely in all four upper rack bracket pin seats.

Lower the upper rack height

 To move the rack to the lower position, slide the upper rack all the way out of the
washer.
 Grasp the handles on each side of the rack lift the rack up while pulling toward
outward. Let the rack bracket slots guide the rack to the lower rack bracket pin
seats. Make sure the rack pins are securely seated in all four lower rack bracket
grooves.
73