Initial Power Up; Home Screen; Menu Tabs - Labconco SteamScrubber 4010010 Series User Manual

Initial Power Up

When the glassware washer is initially connected to a power source, the On / Standby
LED will begin flashing (1 flash per second). The display will remain OFF for the first 10
to 15 seconds, then animated graphics will appear. It will take approximately 90
seconds for the operating system to fully load.

Home Screen

After initial power up, the Home screen will be displayed. Most of the general operation
and system monitoring can be done from the Home Screen.
DATA LOG
PROGRAM
HOME
SCREEN
INDICATOR
BAR
PROGRAM
SELECTION
PROGRAM
PROGRESS
INDICATOR
START
PROGRAM
The menu screen tabs are displayed across the top of each screen as shown on the
Home Screen in Fig. 6-2.
You can move between menu screens by either touching the desired tab or swiping
across the screen from left to right or right to left.

Menu Tabs:

 Home
 Programs
 Data Logging
 Settings
SETTINGS
PROGRAM
SEGMENTS
 Sensors
 Accessories
 (Empty)
 Help
39
Figure 6-2
SENSORS
ACCESSORIES
PRINTER
SETTING
HELP
ESTIMATED RUN
OF PROGRAM
SEGMENT
MAX TEMP