Remove Racks - Labconco SteamScrubber 4010010 Series User Manual

Carefully remove the outer carton and inspect the product for damage that may have
occurred in transit. If the product is damaged, take pictures of the product and the outer
packaging, and notify the freight carrier immediately. Retain the entire shipment,
including outer packaging, intact for inspection by the carrier.
Note: United States Interstate Commerce Commission rules require that claims be filed
with the freight carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco. Unauthorized returns
will not be accepted.
If the product was damaged in transit, you must file a claim directly with the freight
carrier. Labconco Corporation and its dealers are not responsible for shipping damages.
Do not discard the carton or packing material for the product until all of the components
have been checked, installed and tested.
Do not remove the washer from its shipping skid until it is ready to be placed into its
final location. Move the washer by placing a flat, low dolly under the shipping skid.
Remove Racks:
 Locate the Allen Wrench taped to the Quick Installation Guide in the plastic bag
which is taped to the top of the unit.
 Push the Allen Wrench into the hole in the control panel until the door opens.
See Fig 4-1.
 Remove accessories and other items from inside the washer. Cut tie wraps and

remove racks.

ALLEN WRENCH
CONTROL PANEL
23
Figure 4-1