Regional Tab; Clock Tab; Setup Menu: 4. Restore Factory Defaults - Stanley Theta Controller User Manual

Other Screens
Use the right arrow to move to the next tab or press EXIT to save the changes and return to the
Run screen. See section 2.8.1.7 Setup: Exit for further information.
Use the right arrow to move to the next tab or press EXIT to save the changes and return to the
Run screen. See section 2.8.1.7 Setup: Exit for further information.
Use the left arrow to move to the next tab or press EXIT to save the changes and return to the
Run screen. See section 2.8.1.7 Setup: Exit for further information.

2.8.4 Setup Menu: 4. Restore Factory Defaults

Restore Factory Defaults Screens
32
Options Screen
2.8.3.8

Regional Tab

Select language.
2.8.3.9

Clock Tab

This real time clock must be set manually.
Time – hh:mm;ss (h=hour, m=minute,
s=seconds). The format is a military or 24
hour clock.
Date – mm/dd/yyyy (m=month, d=day,
y=year).
Options Screen
Select Restore Factory Defaults by pressing
the SETUP interactive menu button on the
Run screen.
Press 4 or highlight selection and press
Toggle button.
Restores all parameter values to factory
default settings. This helps when a controller
is in an unknown programmed state. Requires
ADMINISTRATOR privileges.
Press the YES interactive menu button to
delete all programming. Press the NO
interactive menu button to retain
programming.
User Manual