Tubenut Nutrunners - Stanley Theta Controller User Manual

Theta Controller

3.6.2 Tubenut Nutrunners

PINCH POINT AT THE EXPOSED GEARS OR TEETH
To Avoid Injury:
•
Never place body parts or clothing, near the socket opening. Dress properly. Do not wear
loose-fitted clothing or jewelry.
•
Follow the Tubenut Nutrunner Sequence of Operation
Tubenut nutrunners are used for installing tube fittings.
Tubenut Sequence of Operation (QPM Tools)
•
Place nutrunner socket on fastener.
•
Press the MFB to arm the start function.
•
Depress start lever. The tool runs the selected Job.
•
The tool stops after reaching torque.
•
Release the lever and lift the tool from the fastener. All tool status lights flash to indicate that
the tool will now run in reverse to open the socket.
•
Depress the start lever until the socket returns to the open position.
•
Release the lever.
•
Remove the tool.
QPM DC Electric Tools
W A R N I N G
45