Table of Contents
Advertisement
QPM DC Electric Tools
This chapter is intended to promote proper and safe use and give guidance to owners, employers,
supervisors and others responsible for training and safe use by operators. DC Electric tools from
STANLEY ASSEMBLY TECHNOLOGIES are intended for use in industrial threaded fastening or
precision position and or adjustment applications only. Some instructions may not apply to all
tools. Please contact your Stanley Sales Engineer for information or assistance on Stanley training
for assembly tool operation.
3.1 Tool Specifications
Operating Conditions
Temperature
Humidity
Noise Level: A-weighted emission sound pressure level at the work station < 70dBA (ref 20µPa)
as determined according to ISO 15744-2002.
Vibration Level: Weighted root mean square acceleration value at the handle < 2.5 m/s
determined according to ISO 8662.
STANLEY ASSEMBLY TECHNOLOGIES hereby declares the following sound and vibration emission
levels as required by the Machinery Directive 98/37/EC.
Product
A-weighted emission sound pressure level
at the work station L
Value determined according to
ISO 15744-2002 * using as basic standards
ISO 3744 and ISO 11203
EC0, EC1,
EC2, EC3,
< 70dBA
EC4 and EC5
electric tools
* Operating conditions for all measurements: full rated speed, no load, rated supply voltage or
pressure.
A-weighted emission sound power level L
levels are below 85dBA.
C-weighted peak emission sound pressure level L
Uncertainty K
, K
, K
pA
WA
pCpeak
To Avoid Injury:
This information is provided to assist in making rough estimates of sound and vibration exposure
levels in the workplace. The declared emission values were obtained by laboratory type testing in
accordance with the stated standards. Levels measured in individual workplaces may be
higher.
The actual exposure levels and risk of harm experienced by an individual user depends upon the
work piece, workstation design, duration of exposure, and the physical condition and work habits of
the user. To help prevent physical impairment, a program of health surveillance is highly
recommended to detect early symptoms which may relate to sound and/or vibration exposure, such
that appropriate preventive measures may be taken.
38
32 to 122 ºF (0 to +50 ºC)
0 to 95 % non-condensing
(ref 20µPa).
pA
: not required, declared sound pressure emission
WA
: not applicable to these products.
pCpeak
: not relevant, declared levels are maximum values.
W A R N I N G
User Manual
2
as
Weighted emission root mean
square acceleration level at the
handle. Value determined
according to ISO 8662 *
(single axis)
< 2.5 m/s²
Advertisement
Table of Contents
