Getting Started; Ec Directives; Warnings And Cautions - Stanley Theta Controller User Manual

Theta Controller

Getting Started

This manual is intended to promote proper and safe use and give guidance to owners, employers,
supervisors, and others responsible for training and safe use by operators and maintainers. Please
contact your Stanley Sales Engineer for further information or assistance on Stanley training or
assembly tool operations.

1.1 EC Directives

The QPM tightening systems are designed and built, in whole or in part, using the following
standards and or directives.
2006/42/EC Machinery Directive
Standard Title / Description
EN292-1,2 Safety of Machinery - Basic Concepts
EN14121-1 Safety of Machinery - Principles of Risk Assessment
EN50178 Electronic Equipment for Use in Power Installations
EN60204-1 Safety of Machinery, Part 1 - Electrical Equipment of Machines
EN60745-1 Hand-Held Motor-Operated Electric Tools - Safety
89/336/EEC Electromagnetic Compatibility Directive
Standard Title / Description
EN55011 Conducted and Radiated Emissions
EN61000-3-2 Current Harmonics
EN61000-3-3 Voltage Fluctuation and Flicker
EN61000-4-3 Radiated Immunity
EN61000-4-4 Fast Burst Transients
EN61000-4-5 Surge
EN61000-4-6 Conducted Immunity
EN61000-4-8 Magnetic Immunity
EN61000-4-11 Voltage dips/interruptions
EN61000-4-2 Electrostatic Discharge Immunity
Level 4: Contact Discharge 8 KV, Air Discharge 15 KV

1.2 Warnings and Cautions

The safety notices and warnings for protection against loss of life (the users or service personnel)
or for the protection against damage to property are highlighted in this document by the terms and
pictograms defined here. The terms used in this document and marked on the equipment itself
have the following significance:
Indicates that death or severe
personal injury will result if
Danger
proper precautions are not taken.
Indicates that death or severe
personal injury may result if
Warning
proper precautions are not taken.
Indicates that property damage
may result if proper precautions
Caution
are not taken.
Getting Started
Indicates a general hazard. This
icon appears as a part of a
Danger, Warning, or Caution
notice.
Indicates that eye protection
should be worn. This icon
appears as a part of a Danger,
Warning, or Caution notice.
Read and understand all the
safety recommendations and all
operating instructions before
operating tools and controllers.
1