Table of Contents
Advertisement
Theta Controller
Other Screens
One user must be an Administrator. Administrator rights give a user full access to the
controller. This enables all privileges including restoring factory defaults and adding
users.
The Administrator must login to change user's access. The unlocked icon appears in the
upper left corner of screen after Administrator login.
Select the Access level.
Each access is exclusive and must be assigned individually. Options include:
NONE – Denies access.
LOCAL – Allows access from the keypad.
REMOTE – Allows access from a computer.
BOTH – Allows access from the keypad and a computer.
Setup – Users at this level can modify all parameters in the Job and Communications
areas. They may modify parameters under the Input, Output and Trigger tabs in the
Other area.
Tool – Users at this level can modify parameters under the Tool tab in the Other area,
as well as set Preventive Maintenance Threshold and reset the PM and Cycle counters
in the SERVICE menu.
Diagnostics – Users at this level can force Inputs or Outputs ON or OFF and
REMOVE forces in the I/O tab of ANALYZE.
Communications – Users at this level can modify the serial port settings.
Press OK to save.
To delete a user press the MANAGE interactive menu button and select option 2. Delete.
Confirm deletion by pressing OK. This action requires the Administrator password; once
entered, user is deleted.
Import – Users can be entered from a backup file. Connect a USB memory stick to the USB
port, scroll to desired file and press IMPORT. The new users display on the User list.
Export – To backup Users, connect a USB memory stick to the USB port, name the file, then
press SAVE.
Press OK to save.
Programming
Options Screen
27
Advertisement
Table of Contents
