Table of Contents
Advertisement
Outputs
Description
JOB
Asserts when a job is completed (accumulated bolt count equals target bolt
COMPLETE
count). Resets when a different job is selected.
Size: 1 bit
Configuration:
Contact Type
Output Type
FAULTED
Asserts when there is a fault on the controller. Resets when the fault clears.
Size: 1 bit
Configuration:
Contact Type
Output Type
READY
Asserts when the controller is energized and there are no faults and there is
nothing disabling the tool, such as Error Proofing or a Stop input. See section
2.5.6 Run Display for the conditions that can Stop Tool Operation. Resets when
the controller is turned off or there is anything stopping the tool from operating.
The size of this output function is 1 bit.
Configuration:
Contact Type
Output Type
SYNC OUT
Asserted when the controller has finished a synchronized step and the SYNC IN
input is asserted. Resets when the SYNC RESUME input is asserted.
Size: 1 bit
Configuration:
Contact Type
Output Type
54
User Manual
Advertisement
Table of Contents
