Table of Contents
Advertisement
2.8 Theta Controller Programming
EXCESSIVE TORQUE CONDITION
To Avoid Injury:
•
Only trained and qualified personnel should program controllers.
•
Never set control limits above the maximum rating of the tool.
•
Setting control limits above the maximum rating of the tool can cause high reaction torque.
•
Always test for proper tool operation after programming the controller.
The controller uses three main menus to display information and enable programming:
•
Setup menu
•
Service menu
•
Analyze menu
To begin programming a tool strategy, press the Setup menu button.
1. Jobs – use to perform tool strategy programming such as torque and speed parameters.
2. Communications – use to program serial port options.
3. Other – use to set parameters for all other features, including system level, users, passwords, I/O
and tool functions.
4. Restore Factory Defaults – use to backup/restore/delete programming and return controller to
factory defaults.
To access, press the corresponding menu number on the keypad, or use the up/down arrow keys to
highlight, then press the Toggle button.
Icon Legend
Icon Description
Menu Buttons
Left/Right Arrow Keys
Up/Down Arrow Keys
Toggle Button
Numeric Keypad
The left column shows the currently defined Theta Controller settings and menu choices. The
Options Screen column shows options for each selection. Screen navigation options appear above
each screen.
Default Screens
12
W A R N I N G
Press to activate menu option noted above button.
Navigate tabs as well as backspace and space.
Scroll through menu selection and character selection.
Selects option for data input, accepts changes.
Data input and, when applicable, menu selection. Can
be used for job selection when enabled to do so.
User Manual
Navigation
Options Screen
Advertisement
Table of Contents
