Table of Contents
Advertisement
Theta Controller
Other Screens
Programming
Options Screen
2.8.3.7
Tool Tab
Values modified under this tab are saved to
the tool not the controller. Users must have
TOOL or ADMINISTRATOR access level to
modify values here.
PM Limit – When the PM Counter in the tool
exceeds this threshold, the preventive
maintenance LED on the front panel
illuminates indicating it is time to perform
maintenance on the attached tool.
Temperature Limit – Identifies the threshold,
in degrees Celsius, for tool shut off. This is
caused by excessive duty cycle on the tool.
Torsion Factor – See Appendix B for an
explanation of this parameter and how to
determine a correct value. Otherwise, use
default of zero.
Requires Arming – Forces the Tap Action on
the MFB to Arm. See section 3.6.2 Tubenut
Nutrunners for further information. Tubenut
tools require arming as a factory setting.
31
Advertisement
Table of Contents
