Solving Problems - American Dynamics ADTT16E Operator's Manual

Solving Problems

If you experience problems with your ADTT16E advanced dome controller, use this section
to identify possible solutions. If these procedures do not solve the problem— or the problem
is not listed here—contact your American Dynamics representative for assistance.
Problem Type
Monitor and VCR Problems
Monochrome Video-Switching Unit Problems
Color Video-Switching Unit Problems
Multiplexer Live Mode Problems
Multiplexer Motion Detection Problems
Multiplexer Tape Mode Problems
Controller Camera Control Problems
Controller Camera Control Problems
Monitor and VCR Problems
Problem Description
No video on monitor.
All live pictures too
bright, too dark, or
incorrect color.
Some live pictures too
dark.
Poor or unstable VCR
pictures.
VCR not recording.
6-10
Possible Solution
•
Verify that the monitor is connected to an electrical
outlet and is turned on and properly adjusted.
•
Check input camera/dome power and lens (iris)
adjustments.
•
Check video camera connections to video-switching
unit and dedicated monitors.
•
Check video connections from multiplexer/video-
switching unit to monitors.
•
Check monitor adjustments.
•
Check camera iris for proper adjustment.
•
The VCR might be faulty or require maintenance.
Perform periodic maintenance and test VCR
performance.
•
Make sure the VCR is connected to an electrical
outlet and is turned on.
•
Make sure a tape cartridge is inserted into the VCR.
ADTT16E Advanced Dome Controller Operator's Manual
Page Number
6-10
6-11
6-11
6-12
6-12
6-12
6-13
6-13