American Dynamics ADTT16E Operator's Manual page 74

DirectSet Command /Menu Item
* 14+Info: WDR OFF
15+Info: Smooth Scan
16+Info: Stepped Scan
17+Info: Random Scan
20+Info: Dome Information
Working with the DirectSet Menu
1. Select the dome whose DirectSet menu you want to display.
2. Press Info. The Dome DirectSet menu displays. If necessary, press Focus Far or
Focus Near to scroll between pages of the menu.
3. Enter a number and press Info to use a DirectSet function. See Table 6-1 for a
description of the options.
4. When a selection is made, the DirectSet menu automatically closes. To close the menu
without making a selection, press Info.
Programming Time Saver
DirectSet features can be accessed at any time by entering the menu number
and pressing Info.
6-6
Description
Disables Wide Dynamic Range (WDR). Use
this setting when the light level is constant or
changes in lighting conditions are gradual.
Initiates a smooth scan between the left and
right scan limits, starting at the left scan limit.
If no scan limits have been set, initiates a
smooth 360° clockwise rotation around the
dome axis using the current tilt, zoom and
focus settings.
Initiates a scan between the left and right scan
limits pausing briefly every 10° (at 1x zoom),
starting at the left scan limit. When the right
scan limit is reached, the scan is reversed. If no
scan limits have been set, initiates a clockwise
rotation around the dome axis pausing briefly
every 10° (at 1x zoom) for 3 seconds using the
current tilt, zoom and focus settings.
Initiates a scan between the left and right scan
limits pausing randomly between the limits. If
no scan limits have been set, initiates a
clockwise or counter-clockwise rotation
around the dome axis using the current tilt,
zoom and focus settings. The dome pauses
randomly as it rotates around the axis.
Displays the Dome Information screen
available through the dome configuration
menu.
ADTT16E Advanced Dome Controller Operator's Manual