Selecting And Controlling Cameras - American Dynamics ADTT16E Operator's Manual

Selecting and Controlling Cameras

Each camera has been assigned a unique number. To select a camera, enter the camera
number and press
button.
Figure 3-2: Camera button
Full-screen video from the selected camera appears on the monitor. The associated camera
number appears in the bottom left corner of the monitor. If the camera is selected via the
Primary Controller, video appears on the Main monitor. If the camera is selected via the
Secondary Controller, video appears on the Call monitor.
How the System Resolves Conflicts in Camera Control
If the configuration includes two controllers, the Primary Controller will always have camera
control priority over the Secondary Controller. The Primary Controller "locks" the selected
camera, and the Secondary Controller will only be able to display its video on the Call
monitor. The following situations may occur:
Situation
The Secondary Controller attempts to
control a camera that is currently selected
by the Primary Controller.
The Primary Controller selects a camera
currently controlled by the Secondary
Controller. The Primary Controller secures
control of the camera.
3-6
(Camera button). Figure 3-2 illustrates the location of the Camera
A
B
Peel
1
Info
4
On
Output
Off
Menu
7
Clear
Iris
Open
Close
C
D
Flip
3
View
5 6
Pattern
Repeat
Pattern
8 9
0
Previous Next
Message on Secondary Controller
Camera In Use
Camera Override
ADTT16E Advanced Dome Controller Operator's Manual
Enter a camera
number and press
to select a camera.