Logging On / Off The Adtt16E Controller - American Dynamics ADTT16E Operator's Manual

Logging On / Off the ADTT16E Controller

If passwords have been programmed for the advanced dome controller, you must log on
before attempting to use the system. Passwords are 4-digit codes that restrict access to
system functions. Three password levels are available: Administrator, Programmer, and
User. The functions available are based upon the password level assigned.
Administrators have full system privileges. Administrators may set, change or disable
•
passwords, program all system functions, and perform all system operations.
Programmers may perform all system programming and operations. Programmers cannot
•
set, change or disable passwords.
Users may perform all operations and change the controller language setting. Users
•
cannot perform system programming or set, change or disable passwords.
See Chapter 2 for password programming instructions.
Logging On the Controller
Note
If Enter Password does not appear on the LCD, passwords may not be
enabled, or another operator may be logged on to the controller.
1. Enter Password appears on the LCD.
2. Enter the 4-digit password.
If the code is recognized, camera information appears on the LCD.
•
If the code is not recognized the controller beeps and Enter Password remains on
•
the LCD. Try entering the password again.
3. Once the password is entered, you can begin performing the other tasks described in this
manual.
Logging Off the Controller
When finished using the controller, log off to prevent unauthorized use.
1. Press Menu. Logoff appears on the first line of the LCD.
2. Press Zoom to select the first line of the LCD.
Note:
3. Enter Password appears on the LCD indicating that the logoff was
successful.
Note:
controller beeps.
3-2
The zoom buttons are located to the left of the Tracker Ball.
If Logoff is selected when passwords have not been enabled, the
ADTT16E Advanced Dome Controller Operator's Manual