American Dynamics ADTT16E Operator's Manual page 30

Disabling Passwords
Disable passwords by setting the Administrator password to "0000" (four zeros). Perform
this task on each controller where passwords have been set.
1. Enter the current Administrator password at the Enter Password prompt on the
controller.
2. Press Menu.
3. Scroll through the menu items until Admin Password appears on the LCD.
Press Zoom to select the first line of the LCD or Focus to select the second line.
4. Enter New Pswd appears on the LCD. Use the number buttons to enter 0000.
Press Zoom or Focus to save.
Note: Asterisks (*) appear on the LCD as the numbers are entered.
5. ReEnter New Pswd appears on the LCD. Enter the 0000 again. Press Zoom or
Focus to save.
I M P O R T A N T
If the same password is not entered, the controller beeps. You must start again at
step 4.
6. Press Menu to return to normal controller operation.
Once the Administrator password is set to 0000, all passwords are disabled. A password is
no longer required to use the controller.
Tip:
levels first, and then follow the procedure for password removal.
2-10
If you experience problems disabling the password, program all password
ADTT16E Advanced Dome Controller Operator's Manual