American Dynamics ADTT16E Operator's Manual page 35

2x2 DISPLAY FORMAT
3x3 DISPLAY FORMAT
4x4 DISPLAY FORMAT
Press
(Display button) on the Primary Controller to choose from the available display
formats. Each time you press
format. Regardless of which display format is active, you will always have control over the
camera indicated on the controller LCD.
Tip:
to put the monitor in the multi-camera display format. Press the number
associated with an individual camera to call that camera to the full-screen mode
(or select the full-screen display mode by pressing
If your system includes two monitors, the Main monitor is dedicated to multi-
camera display and the Call monitor is dedicated to full-screen display.
If your system includes one controller with two monitors, the controller may be
used to control either Main or the Call monitor. To switch control to the Call
monitor, press the Sel button on the multiplexer twice. To return control to the
Main monitor, press the Sel button again.
Operating the ADTT16E Advanced Dome Controller
Video displays from 4 cameras when 2x2 format is
active. 4-, 9-, and 16-camera multiplexers support this
display format.
Video displays from 9 cameras when 3x3 format is
active. 9- and 16-camera multiplexers support this
display format.
1 2 3
4 5 6
7 8 9
Video displays from 16 cameras when 4x4 format is
active. 16-camera multiplexers support this display
format.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
, the monitor changes from 2x2, 3x3, 4x4, or full-screen
If the system includes only one monitor, press (the Display button)
).
3-5