American Dynamics ADTT16E Operator's Manual page 29

Setting the User Password
Users (operators) are restricted from performing any programming tasks. Users can only
operate the ADTT16E system, log on or log off the controller, and change the LCD language
setting.
I M P O R T A N T
You must be logged on as the Administrator to set the User (Operator) password.
1. Press Menu.
2. Scroll through the menu items until User Password appears on the LCD. Press
Zoom to select the first line of the LCD or Focus to select the second line.
3. Enter New Pswd appears on the LCD. Use the number buttons to enter the 4-digit
User password. Press Zoom or Focus to save.
Note: Asterisks (*) appear on the LCD as the numbers are entered.
4. ReEnter New Pswd appears on the LCD. Enter the 4-digit User password used in
step 3. Press Zoom or Focus to save.
I M P O R T A N T
If the same password is not entered, the controller beeps, and you must start again
at step 3.
5. Once the password is set, the controller menu displays. Press Menu to return to normal
controller operation.
Make note of the User password and keep it in a secure place. Provide this password to those
users who require the authority to perform basic system operations. A password must be
entered anytime the controller is used.
Changing Configuration Settings 2-9