American Dynamics ADTT16E Operator's Manual page 28

Setting the Programmer Password
Once the Administrator password is set, assign Programmer and User (Operator) passwords.
Programmers can perform all programming tasks documented in this book except setting,
changing, or disabling passwords.
I M P O R T A N T
You must be logged on as the Administrator to set the Programmer password.
1. Press Menu.
2. Scroll through the menu items until Program Password appears on the LCD. Press
Zoom to select the first line of the LCD or Focus to select the second line.
3. Enter New Pswd appears on the LCD. Use the number buttons to enter the 4-digit
Programmer password. Press Zoom or Focus to save.
Note: Asterisks (*) appear on the LCD as the numbers are entered.
4. ReEnter New Pswd appears on the LCD. Enter the 4-digit Programmer password
used in step 3. Press Zoom or Focus to save.
I M P O R T A N T
If the same password is not entered, the controller beeps, and you must start again
at step 3.
5. Once the password is set, the controller menu displays. Press Menu to return to normal
controller operation.
Make note of the Programmer password and keep it in a secure place. Provide this password
to those users who require the authority to program system features, such as Quick Views,
Patterns, and sequences. A password must be entered anytime the controller is used.
2-8 ADTT16E Advanced Dome Controller Operator's Manual