Controller Operating Modes - American Dynamics ADTT16E Operator's Manual

Controller Operating Modes

The ADTT16E controller functions differently depending upon the current operating mode.
Five operating modes are available:
Camera control mode
•
Menu/programming mode
•
Sequence mode
•
Alarm mode
•
Quest multiplexer control mode
•
Camera Control Mode
Camera control mode is the normal operating mode for the controller. In camera control
mode, the currently selected camera number and any running Pattern or Quick View appears
on the LCD. The Tracker Ball functions as the camera pan/tilt controller, and the zoom and
focus buttons control the zoom and focus of the currently selected camera. The following
tasks can be performed in camera control mode:
Change the display format for viewing video on the main monitor
•
Select individual cameras and display their video on the call monitor
•
Manually control cameras
•
Initiate automatic system functions
•
Menu/Programming Mode
Pressing the Menu button on the keypad activates menu/programming mode. In this mode,
the LCD displays the available menu items, and the
There are always two menu items visible at one time on the LCD
The zoom and focus buttons are used to select the menu items. The
) selects the first line of the LCD. The
Tracker Ball
selects the second line of the LCD.
Figure 1-3: Operating in menu/programming mode
1-6
The Tracker Ball scrolls
through the menu.
Zoom selects the
first line of the LCD.
scrolls through the items.
Tracker Ball
zoom
buttons (right of
focus
ADTT16E Advanced Dome Controller Operator's Manual
buttons (left of
)
Tracker Ball
The LCD displays the
menu items.
Focus selects the
second line of the LCD.