American Dynamics ADTT16E Operator's Manual page 76

Turning Key Click Sound On / Off
1. Press Menu.
2. Scroll through the menu items until Key Click On/Off appears on the LCD.
Press Zoom or Focus to select. The current key click setting appears on the LCD.
Keyclick ON
Change w <Next>
3. Press Next to change the setting.
Keyclick ON indicates that key click sound is enabled.
•
Keyclick OFF indicates that key click sound is disabled.
•
4. When finished making changes, press Menu to resume camera control mode.
Adjusting Key Click Volume
1. Press Menu.
2. Scroll through the menu items until Adj Keyclick Vol appears on the LCD.
Press Zoom or Focus to select.
3. Press Previous or Next to change the setting.
Press Previous to make the volume softer.
•
Press Next to make the volume louder.
•
4. When finished making changes, press Menu to resume camera control mode.
Locking or Unlocking the Multiplexer Front Panel
Tip:
To prevent or allow access to the front panel functions on the multiplexer, use the
lock/unlock function.
1. Press Menu.
2. Scroll through the menu items until Tog MUX Lock appears on the LCD. Pressing
Zoom or Focus toggles the setting.
If lock is enabled, Lock_key momentarily displays on-screen.
•
If lock is disabled, Unlock_key momentarily displays on-screen.
•
3. Press Menu to resume camera control mode.
Note: When locked, the Quest multiplexer front panel lock button
6-8
Only the Primary Controller can be used to perform this task.
Keyclick OFF
Change w <Next>
ADTT16E Advanced Dome Controller Operator's Manual
illuminates.