System Features - American Dynamics ADTT16E Operator's Manual

System Features

The ADTT16E advanced dome controller provides the following features:
• Support for up to 64 domes.
• Call up video from individual cameras or multiple cameras using a compatible quad splitter
or multiplexer.
• Control a camera's pan and tilt movements, as well as its zoom, focus, and iris settings.
• Run the default SpeedDome pattern, called an Apple Peel, that provides you with complete
video coverage of an area.
• Initiate a SpeedDome flip that rotates the dome 180° from its current pointing direction.
• Define and display Quick Views, which are immediate camera call-ups of pre-defined views,
with automatic zoom and focus.
• Define and run Patterns, which comprise a series of pan, tilt, zoom, and focus movements
from a single camera.
• Program a Controller Sequence incorporating up to 16 pre-defined Quick Views and
Patterns to automatically display one after the other on the main monitor.
• Control the state of dome outputs via the controller. These outputs allow you to control
lights, door locks, or other devices when connected through relays.
• The ability to define up to 64 dome alarms triggered by dome inputs. The alarm response
automatically calls a pre-defined Quick View, Pattern, or fixed shot and may be configured
to initiate a dome output.
• Clear system alarms via the Primary Controller. Up to four alarms may be queued.
• Use controller utilities to configure system settings, test communications, reset domes, and
display system information.
1-4 ADTT16E Advanced Dome Controller Operator's Manual