American Dynamics ADTT16E Operator's Manual page 17

The following tasks can be performed in menu/programming mode:
Configure system settings: external device, LCD display language, and Primary or
•
Secondary controller.
Program automatic functions: Quick Views, Patterns, and Controller Sequence
•
Program dome alarm actions: inputs triggering alarms with associated camera actions,
•
and output activated whenever an alarm is triggered.
System maintenance functions: test device communications (ping), reset domes, display
•
version information, adjust LCD backlighting, and adjust key click sound.
Sequence Mode
Pressing the Seq button on the keypad activates the sequence mode. This runs the
Controller Sequence programmed using menu/programming mode. The Controller Sequence
consists 16 previously defined Quick Views and Patterns (called events). These events run
one after the other on the monitor. The sequence mode provides you with an unattended
surveillance of your facility. The Controller Sequence runs continuously until you stop it
manually.
When the controller is in the sequence mode, the LCD displays the following information:
Camera number whose video appears on the monitor
•
The event number (1 through 16) that the Sequence is currently displaying
•
The remaining seconds that until the next event occurs
•
For more information about the Controller Sequence, see chapters 3 and 4.
Getting Started with the ADTT16E Advanced Dome Controller
Tip: The A, B, C, and D buttons may also be used in menu/programming
mode. The A or B buttons select menu items.
the menu.
A selects the first line on the LCD
•
B selects the second line item on the LCD
•
C scrolls to the previous menu item
•
D scrolls to the next menu item.
•
and buttons scroll through
C D
1-7