American Dynamics ADTT16E Operator's Manual page 65

Assigning Cameras to Multiplexer Display Windows
1. Press
2. Press
Figure 5-3: Example multiplexer display programming screen.
Selected
window
3. Use the Tracker Ball to move the highlight box to the window you want to set.
4. Enter the camera number and press
5. Repeat steps 3 and 4 for each window you want to setup. When finished press D (to right
of LCD display) to exit setup mode.
Quest Multiplexer Support
until the display format you want to change appears on the monitor.
to start setup mode. The word Set and a highlight box appears on the screen.
SET
to assign the camera to the highlighted window.
5-5