Configuring The External System - American Dynamics ADTT16E Operator's Manual

Configuring the External System

The controllers are capable of interfacing with a number of different external devices. The
Primary Controller must be configured to communicate with the correct device for the
system to operate correctly. Table 2-2 lists the available settings.
Table 2-2: List of Configure Device settings
Device Setting
Device=Quad
=POSEM
Device=Mux 4
=POSEM
Device=Mux 9
=POSEM
Device=Mux 16
=POSEM
Device=Mux 4
=Duplex
Device=Mux 9
=Duplex
Device=Mux 16
=Duplex
Device=Mux 10
=Triplex
Device=Mux 16
=Triplex
PC
Remote
None
Changing Configuration Settings
Quad processor
Standard 4-channel multiplexer
Standard 9-channel multiplexer
Standard 16-channel multiplexer
4-channel Quest Duplex multiplexer
9-channel Quest Duplex multiplexer
16-channel Quest Duplex multiplexer.
10-channel Quest Triplex multiplexer
16-channel Quest Triplex multiplexer.
Reserved for service use.
Use this option if the controller is installed at a remote
location and communicates at 1200 baud.
No external device is connected.
Description
2-5