SensorNet Network Guide (PN 8000-0970-01). 6003-0047-01 5899-0004-102 2. Mount the EIM on a wall or other surface within 2880-0083-01 3m (10') of the ADTT16E Touch Tracker. 2816-7634-44 2109-0254-04 3. Connect the power transformer and SensorNet 2141-0002 cable to J3 on the EIM.
4. Press the left zoom/focus button (line 1) or right zoom/focus button (line 2) to select the Reset Dome menu option. The ADTT16E Touch Tracker sends a request to the selected dome to reboot. After a brief delay, the controller returns to Camera Control Mode.
Indicates Flash PROM Product Code E 0701-0010-0105 Indicates EEPROM 5. Press Menu to exit. ADTT16E TOUCH TRACKER CONTROLLER WITH INTELLEX INSTALLATION INSTRUCTIONS Performing SensorNet Ping Test 1. Use the number buttons to select a dome to reset, then press Cam.