Displaying Quick Views - American Dynamics ADTT16E Operator's Manual

"Flipping" the SpeedDome
A SpeedDome camera dome can rotate 180° from its current pointing direction by pressing
the Flip button. This feature is useful when tracking someone who walks directly under the
SpeedDome and continues walking on the other side. The message Flip Dome appears on
the second line of the LCD when the Flip button is pressed.

Displaying Quick Views

Use Quick Views to call up specific scenes from programmable domes, regardless of the
current pointing direction. This feature is useful when you want to look at a particular item
or area quickly without manually adjusting pan, tilt and zoom. Depending on the dome type,
either 4 or 96 Quick Views may be defined for the selected dome. Figure 3-10 illustrates the
location of the View button.
Figure 3-10: View button
A
B
Peel
Info
On
Output
Off
Menu
Clear
Close
Chapter 4 provides Quick View programming instructions. If a list has been compiled for
your facility, refer to the Programming Worksheets (8200-0306-04) to determine which
Quick Views are available.
To display a Quick View:
1. Select the camera where the Quick View is saved.
2. Enter the Quick View number (1-96) and press View.
The camera immediately points to the programmed position, and then adjusts the zoom
and focus. The Quick View information appears on the second line of the LCD.
Note: The controller beeps if an invalid Quick View number is entered.
3-12
Cam 16
1 3
5 6
4
7 8 9
0
Iris
Open
Cam 1
Flip Dome
C
D
Flip
View
Pattern
Repeat
Pattern
Previous Next
+
View 96
ADTT16E Advanced Dome Controller Operator's Manual
+
Enter Quick View number
and press to display the
Quick View.