American Dynamics ADTT16E Operator's Manual page 72

Testing Dome/Controller Communications
1. Press Menu.
2. Scroll through the menu items until Ping Dome / TTR appears on the LCD. Press Zoom
or Focus to select.
3. The LCD displays the dome communication (ping) test information.
4. Press Next to display the controller ping test information.
5. Make note if any of the tests fail. Press Menu to exit.
I M P O R T A N T !
The number of failed messages should be equal to zero. If a number appears in
this field, contact your service representative for instructions.
Displaying the Dome DirectSet Menu
SpeedDome Ultra VII and other suitably equipped domes provide a DirectSet menu to
access commonly used features. Depending upon the dome type, different DirectSet menu
options will be available.
The Info button on the ADTT16E controller is used to display this menu.
Figure 6-1: Displaying SpeedDome Ultra VII (or other suitably equipped dome) DirectSet Menu
Press to display
the DirectSet
6-4
Number of ping
messages sent
Number of ping
messages sent
menu
Ping Dome
Tx=0010 Bad=0000
Ping Other TTR
Tx=0006 Bad=0006
A
B
Peel
Info
On
Output
Off
Menu
Clear
Iris
Close
ADTT16E Advanced Dome Controller Operator's Manual
Number of failed
messages
Number of failed
messages
1 3
4 5 6
7 8 9
0
Open Previous
C
D
Flip
View
Pattern
Repeat
Pattern
Next