American Dynamics ADTT16E Operator's Manual page 24

Changing the Primary/Secondary Controller Setting
I M P O R T A N T
If only one controller is installed, it must be configured as the Primary Unit.
1. Press Menu.
2. Scroll through the menu items until Tog Primary/2nd appears on the LCD.
Press Zoom or Focus to select.
Tip:
3. If configured as the Primary Controller, the LCD displays:
If configured as the Secondary Controller, the LCD displays:
4. Press Next to change the controller setting. Each time Next is pressed, the display
toggles between Primary Unit and Secondary Unit.
5. Press Menu to save the setting. If the setting changed, the controller restarts to activate
the new setting.
2-4
Zoom selects the first line of the LCD; Focus selects the second line.
Primary Unit
Change w <Next>
Secondary Unit
Change w <Next>
Output
Menu
Close
Press Next to switch between
Primary and Secondary Mode.
A
B
Peel
1 3
Info
5 6
4
On
Off
7 8 9
Clear
0
Iris
Open Previous
ADTT16E Advanced Dome Controller Operator's Manual
C
D
Flip
View
Pattern
Repeat
Pattern
Next