14
|
Configuration
Mode
SW
R2
1E
14.1.5 Miscellaneous settings
Group address
About group address
To assign an address to a group of indoor units
Installer and user reference guide
72
SW description
1
Touch button indicator (on
screen)
8
Home screen setpoint
INFORMATION
Remote controller field setting R1-11 allows for changes to the behaviour of the
status indicator, making the controller suitable for use in hotels.
To control the system with central control equipment, it is required that you assign
the indoor units with the necessary addresses. It is possible to assign an address to
a group of indoor units, or to individual indoor units.
Group of indoor units
Individual indoor units
Prerequisite: You are in the installer menu.
1 Navigate to the address settings menu.
2 Select "Group"
3 Confirm your selection.
4 Define the address.
Value
0: None
1: Small
2: Medium
3: Large
1: Numerical
2: Symbolic
Default value
1
1
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12