14
|
Configuration
14.2.3 Software update with updating tool
To update the software with Updater
Installer and user reference guide
88
Prerequisite: PC with Updater (contact your dealer for the correct version of the
software)
Prerequisite: PC USB cable EKPCCAB4 or higher (includes a USB cable and
additional connection cables)
1 Make sure that the indoor unit is powered OFF.
2 Connect the controller to the PC.
b
a
a PC with Updater
b USB cable
c Controller PCB
d To indoor unit
3 Power ON the indoor unit.
4 Open Updater.
5 In Updater, go to "Update procedure".
6 Type in the model name of the controller.
7 Select the desired update procedure.
8 Follow the on-screen instructions.
c
d
X2A
X2A
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12