15
|
About the app
15.5.24 Draught prevention
15.5.25 Quick start
Installer and user reference guide
112
The ranges correspond with the following airflow swing patterns:
Left
Left swing
INFORMATION
The availability of this function depends on the type of indoor unit.
INFORMATION
For systems in which the indoor units run in simultaneous operation, it is possible to
set the airflow direction range of individual indoor units by connecting the controller
to each indoor unit separately.
Prevent people from getting affected by indoor unit airflow, based on (the lack of)
presence detected by a motion sensor.
INFORMATION
To use this function, it is required that the indoor units are equipped with a motion
sensor (optional accessory).
INFORMATION
This function is not supported when the system contains Sky Air RR or RQ outdoor
units.
Activate Quick start to quickly bring the room to a comfortable temperature.
When Quick start is active, the outdoor unit operates with increased capacity.
Indoor unit fan speed gets controlled automatically, making manual fan speed
changes impossible.
After activation, Quick start is active up to 30 minutes. After 30 minutes, Quick
start automatically deactivates, and the system resumes normal operation.
Additionally, Quick start will deactivate from the moment you change the
operation mode manually.
Quick start can ONLY be activated when the system is running in Cooling, Heating,
or Auto operation mode.
INFORMATION
This function is only available for Sky Air indoor units.
INFORMATION
This function is not supported when the system contains Sky Air RR or RQ outdoor
units.
Centre
Wide swing
Right
Right swing
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12