To make external input interlock settings
External input interlock settings overview
Parameter
B2 Delay Timer
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
INFORMATION
To use this function, it is required that digital input adapter BRP7A5* is part of the
system.
▪
Make sure that the digital input adapter and its optional contacts (window
contact B1 and key card contact B2) are correctly installed. Confirm that the
voltage free contact of the digital input adapter is in the correct position. For
instructions on how to install the digital input adapter, see the installation manual
of the digital input adapter.
▪
When the digital input adapter does not function properly, external input
interlock is not available in the menu.
▪
When the digital input adapter is part of the system, the system does not allow
for the connection of a slave controller.
▪
When the digital input adapter is part of the system, it is not possible to use the
Schedule function.
▪
When the digital input adapter is part of the system, as well as a centralised
controller, the external input interlock function is controlled by the centralised
controller, and not by the adapter.
Prerequisite: You are in the installer menu.
1 Navigate to the external input interlock menu.
2 Use
and
to navigate through the menu.
3 Press
to select a parameter.
4 With a parameter selected, use
5 With a parameter selected, press
6 When you are done making settings, confirm all settings by selecting
pressing
.
Result: The system will restart and implement any changes made.
INFORMATION
For an overview of settable parameters and what they mean, see
interlock settings
Description
Timer that starts as soon as
the key card is removed.
The unit continues normal
operation until the timer
expires.
and
to change that parameter's value.
to confirm the value for that parameter.
overview" [
4
77].
Possible values
0-10 minutes
14
Configuration
|
and
"External input
Default value
"1 min"
Installer and user reference guide
77