Field Settings - Daikin BRC1E53 Installer's Reference Manual

Field settings

6. Field settings
6-1
Press and hold the Cancel
button for 4 seconds or longer.
The Service Settings menu is
displayed.
6-2
Select Field Settings
the Menu/Enter button.
6-3
"Highlight the "Mode No." by using
the (Left/Right) buttons,, and
select the desired "Mode No." by
using the
For the most commonly-used field
settings, refer to page 17.
6-4
In the case of configuring the
indoor units individually during
group control (When Mode No.
such as 20 ,
are selected), highlight the unit
No. by using the
buttons. and select the "Indoor
unit Number" to be set by using
the (Up/Down) buttons. (In
the case of configuring as a
group, this operation is not
needed.)
6-5
Highlight the SECOND CODE
NO. of the FIRST CODE NO. to
be changed by using the
(Left/Right) buttons and select the
desired SECOND CODE NO. by
using the
Multiple identical mode number
settings are available.
Installer reference guide
15
and press
(Up/Down) buttons.
21 , 22 , 23 , 25
(Left/Right)
(Up/Down) buttons.
6-1
Fan
<Service Settings>
6-2
Service Settings
Test Operation
Maintenance Contact
Field Settings
Demand
Min Setpoints Differential
External Input Interlock
Return Setting
In the case of individual
setting per indoor unit
6-3
Field Settings
6-4
Unit No. Mode
0 20
6-5
Return Setting
NOTE
● In the case of individual configuration per indoor
unit, the current settings are displayed.
● SECOND CODE NO. " - " means that there is no
function available
● In the case of configuring as a group, all SECOND
CODE NO. which may be set are displayed as
" * ".
<Basic screen>
Press and hold the Cancel
button for 4 seconds or
longer while the backlight is
1/3
Press the Menu/Enter
button.
<Field settings>
In the case of group
setting
6-4
Field Settings
6-6
Return
SECOND CODE NO.
FIRST CODE (SW) NO.
Press the Menu/Enter
button.
4P419250-1 – 2015.10
lit.
Mode
10
Setting
BRC1E53