15.5.2 Remote controller firmware update
To update remote controller firmware
15.5.3 Notifications
15.5.4 Master/slave status
15.5.5 Screen
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
Update remote controller firmware. It is required to keep remote controller
firmware up to date. When new firmware is available for a controller, the app will
send out a notification in the operation screen of that controller.
Prerequisite: You are in the operation screen of one of the controllers, and the app
notified you that new firmware for that controller is available.
Prerequisite: You are close to the controller.
1 Tap the settings icon.
Result: You are in the "Unit settings" menu.
2 At the very top, tap "Firmware update available".
Result: You are in the "Firmware update" menu.
3 Tap "Update firmware".
Result: The latest firmware is downloaded to the controller.
Result: During the download, the controller displays the following screen.
Result: After the download, the controller restarts to implement changes.
Get an overview of active system notifications. These can be:
▪
Errors
▪
Warnings
▪
System information
Find out if the controller you are operating is a master or a slave controller. It is not
possible to make changes to master/slave status from the app. For instructions on
how to change a controller's master/slave status, see
4
system" [
41].
Make remote controller screen settings:
15
About the app
|
"11 Starting up the
Installer and user reference guide
103