Permission Level Function; Field Settings - Daikin BRC1E51 Quick Reference

8. Permission level function

■
If required, you can limit the user action by
restricting the number of operable buttons. (Refer
to the chapter "Field settings" on page 5).
Level
1 All
2 • Up/down button
• On/off button
• Operation mode selector button
3 • On/off button
NOTE When pushing a non-operable button, the
icon will be displayed.
■
For switching between level 1 permission and the
selected level in service, proceed as follows
(refer to figure 7):
1 Keep the button pressed,
2 and push the 3 other indicated keys
simultaneously while keeping the
pressed.
■
If you want to limit the user action on the remote
controller to be defined as "sub", start with only
connecting this controller to the unit. Make sure
that this controller is set to "main" (factory set)
first, change the permission level to the setting
you prefer and only then set the remote controller
to "sub" (Refer to the chapter "Field settings" on
page 5).
You can now proceed with connecting the remote
controller to be defined as "main".
Quick reference
5
Operable buttons
button

9. Field settings

If optional accessories are mounted on the indoor
unit, the indoor unit setting may have to be changed.
Refer to the instruction manual for each optional
accessory.
d
Field setting list
Unit No
a
0
0 – 1 – 00
01
4 ––– 5 –––
8 ––– 9 –––
Return
a Unit No
b First Code No
c Second Code No
d Mode
e Field set mode
Procedure
1 Press and hold the
seconds to enter the Field setting menu.
buttons to select Field setting list
2 Use the
and push the
Field setting
Test operation ON/OFF
Register Service Contract
Field setting list
Group No. setting
Indoor unit Airnet No. set
Outdoor unit Airnet No. set
Return
c
Mode
20
2 – 00 3 – 00
6 ––– 7 –––
a ––– b –––
e
Setting
button for four
button.
1/2
Setting
BRC1E51
Remote controller
4PW52905-1