To Mount The Controller - Daikin Madoka BRC1H519W7 Installer And User Reference Manual

10.2.2 To mount the controller

BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
In case you are routing the wiring from the rear, you do not have to remove
anything.
INFORMATION
When routing the wiring from the top or from the rear, insert the wiring through the
knockout hole before mounting the rear casing to the wall.
1 Take the screws and plugs from the accessory bag.
2 Mount the rear casing to a flat surface.
INFORMATION
If required (e.g. when mounting to a flush-mounted electrical installation box),
mount the rear casing by way of the knockout holes.
NOTICE
When mounting the rear casing to a flush-mounted electrical installation box inside a
wall, make sure that that wall is completely flat.
NOTICE
Be careful not to distort the rear casing by overtightening the mounting screws.
10 Installation
|
Installer and user reference guide
37