Daikin Madoka BRC1H519W7 Installer And User Reference Manual page 24

5 | Operation
Installer and user reference guide
24
Setpoint range
If any limitations are set to the default setpoint range (16°C~32°C) with the
setpoint range function (Madoka Assistant app function; see
4
range" [ 111]), it is only possible to raise or lower the setpoint up/down to the set
upper/lower setpoint range limits.
Example: if the reference temperature is 25°C, you can normally lower the
setpoint three steps to 22°C. However, if a setpoint range limit is set to 23°C, you
can only lower the setpoint to 23°C.
28°C
+3°C
25°C
-2°C
23°C
Central control / Schedule
If the system is under the control of a centralised controller or a schedule, then the
regular +3°C/–3°C setpoint range limits can get overruled AND changed.
IF
The centralised controller or schedule
imposes a setpoint that is within the
regular +3°C/–3°C setpoint range.
The centralised controller or schedule
imposes a setpoint that exceeds the
regular +3°C/–3°C setpoint range.
THEN
Nothing unusual happens and the
system follows the regular setpoint and
setpoint range logic.
The imposed setpoint becomes the new
upper/lower limit of the +3°C/–3°C
range, and the whole range shifts in
relation to this new limit.
Example: the reference setpoint is set
to 25°C, yielding the following setpoint
range:
28°C
25°C
22°C
If the centralised controller or schedule
changes the setpoint to 21°C, which is
below the range, then "21°C" becomes
the new lower limit, and the range
shifts in relation to this new limit.
28°C
25°C
22°C
21°C
27°C
24°C
21°C
Madoka wired remote controller
"Setpoint
+3°C
-3°C
+3°C
-3°C
+3°C
-3°C
BRC1H519W+K+S7
4P513689-1E – 2020.12