Daikin BRC1H71W Installation Manual
  1. Manuals
  2. Brands
  3. Daikin Manuals
  4. Remote Control
  5. BRC1H71W
  6. Installation manual

Daikin BRC1H71W Installation Manual

Wired remote controller
Hide thumbs Also See for BRC1H71W:
Table of Contents

Advertisement

Quick Links

• Be sure to read before conducting the installation of this product, and conduct
installation according to this manual.
• Refer to this manual together with the installation manual of the indoor unit.
It is possible to perform settings of some functions from
a smart phone app.
Wired Remote
Controller
Installation Manual
MODEL BRC1H71W
English

Advertisement

Table of Contents
loading

Related Manuals for Daikin BRC1H71W

Summary of Contents for Daikin BRC1H71W

  • Page 1 Wired Remote Controller Installation Manual MODEL BRC1H71W • Be sure to read before conducting the installation of this product, and conduct installation according to this manual. • Refer to this manual together with the installation manual of the indoor unit.

  • Page 3: Table Of Contents

    Contents Safety Considerations ............2 Accessories ................ 3 Remote controller installation procedure ......4 Button Locations and Descriptions ........11 Overview of screens ............12 Setting screen list ............. 13 Names and Functions ............15 Starting up the system ............16 Switching the Changeover Master ........

  • Page 4: Safety Considerations

    WARNING Only qualified personnel must carry out the installation work. Consult your Daikin dealer regarding relocation and reinstallation of the remote controller. Improper installation work may result in electric shocks or fire. Electrical work must be performed in accordance with relevant local and national regulations and with instructions in this installation manual.

  • Page 5: Accessories

    CAUTION Do not install the remote controller in the following locations: (a) Where a mineral oil mist or oil spray or vapor is produced, for example, in a kitchen. Plastic parts may deteriorate. (b) Where corrosive gas, such as sulfurous acid gas, is produced. (c) Near machinery emitting electromagnetic waves.

  • Page 6: Remote Controller Installation Procedure

    Remote controller installation procedure Deciding where to install the remote controller Select the installation location based on “Safety Considerations” (see page 2) and obtain consent of the customer. Creating a wiring through-hole in the wall (when opening a hole in the wall and installing) [Unit : inch (mm)] 3-11/64 (80.5) Back plate...
  • Page 7 Determining the wire routing direction for the back plate Before mounting the controller, determine the wiring direction and remove a piece of the controller’s back plate accordingly (i.e.: a, b, c). The wiring can be routed from the top, the left, or the bottom of the back cover.
  • Page 8 Securing the back plate Wall installation 1 : Take the drywall screws and drywall anchors out of the accessory bag. 2 : Mount the back plate to a flat surface. Drywall anchors Drywall screws In case of installing in the electrical component box 1 : Take the screws for the mounting plate (M3.5×10 and M4×40), and the mounting plates (metal and plastic) out of the accessory bag.
  • Page 9 Connecting the electrical wiring All wiring must comply with the following requirements: Wire specification Value Wiring type Non-shielded, 2-conductor, Stranded copper wire Wiring size AWG-18 Wiring length Maximum 1640 feet (500 m) Prepare the wiring for connection to the remote controller following these instructions: Approx.
  • Page 10 Top outlet P1P2 P1P2 terminal Rear outlet P1P2 Left outlet P1P2 English...
  • Page 11 Bottom outlet P1P2 CAUTION • Keep the wiring away from the power wire so that electrical noise (external noise) is not received. • In order to prevent the entry of water or insects, use putty (field supply) to securely seal the wiring lead-in hole.
  • Page 12 When removing the upper casing Insert a flat head screwdriver into the recess in the back plate and remove the upper casing. (2 locations) CAUTION • The remote controller circuit board is attached to the upper casing. Be careful not to damage the circuit board and casing when removing the upper casing.

  • Page 13: Button Locations And Descriptions

    Button Locations and Descriptions Functions items (i.e., Operation Mode, Fan Speed, and Setpoint) are set from the menu screen. NOTICE • Do not install the remote controller in places exposed to direct sunlight. The LCD may be damaged. • Do not pull or twist the remote controller cord. The remote controller may be damaged. •...

  • Page 14: Overview Of Screens

    Overview of screens How to display the screen The following is just an example. The items available for setting vary depending on the indoor unit you are using. If there is no button operation for about 10 seconds, the screen returns to the home screen.

  • Page 15: Setting Screen List

    Setting screen list Setting list Installer User Administrator menu menu menu Icon Name Description Depends on Operation Mode Operation mode setting  current setting Depends on Fan Speed Airflow rate setting  current setting Depends on Airflow Direction Airflow direction 1 setting ...
  • Page 16 Setting list Installer User Administrator menu menu menu Icon Name Description Bluetooth Setting Bluetooth setting   Backlight Backlight brightness setting   Contrast Contrast setting   Clock Setting Clock setting   Scale reference temperature Standard Temp  ...

  • Page 17: Names And Functions

    Bluetooth SIG, Inc. and use of such marks by r Settings menu name Daikin industries, LTD. is under license. Other trademarks and s Settings menu icon trade names are those of their respective owners.

  • Page 18: Starting Up The System

    Starting up the system • Check for completion of indoor/outdoor unit wiring. • Ensure that covers is closed on electrical component boxes for both indoor and outdoor units prior to restoring power. Power-on • The controller gets its power from the indoor unit. •...
  • Page 19 INFORMATION If a sub controller does not display the home screen 2 minutes after its designation, turn off the power and check the wiring. INFORMATION After re-designating a controller, the system requires a power reset. INFORMATION The following functions are not available for sub controllers: •...
  • Page 20 Designating a controller as main or sub Prerequisite: A remote controller is already connected to the indoor unit. Connect a second controller. After turning on the power, perform setting of the second controller. Result: It will start up automatically. Home screen Wait for a U5 or U8 error code to appear on the screen.

  • Page 21: Switching The Changeover Master

    Switching the Changeover Master About the changeover master When multiple indoor units are connected to one outdoor unit or branch selector unit, by giving the authority to switch the operation mode to a specific indoor unit, the operation switching of other indoor units can be controlled. •...
  • Page 22 Heat pump system When multiple indoor units are connected to 1 outdoor unit: Give the authority to choose cooling, heating, or auto to 1 of these remote controllers. a Outdoor unit b Indoor unit Cool Cool c Remote controller d Changeover master e Changeover mode follower •...
  • Page 23 Releasing the changeover master To change the authority to choose cooling/heating, you must first specify the remote controller with the authority, then release the authority. Depending on the system, setting may not be available. Prerequisite: You are in the installer menu. You are operating the controller of the indoor unit that you want to release from being the changeover master.
  • Page 24 Setting up the changeover master This setting is available only when none of the remote control in the system has master control. Prerequisite: No indoor unit is yet set as the changeover master (“ ” icon blinking on all controllers). You are operating the controller of the indoor unit that you want to set as the changeover master.

  • Page 25: Installer Menu

    Installer Menu How to enter the Installer menu Installer menu screen Home screen Press and hold button for 5 seconds or Auto Cool ˚F longer to display the information screen. Room Text mode Icon mode Information screen Press (in that order) and hold ...

  • Page 26: Field Setting

    Field Setting Field settings method This section describes how to perform field setting. Refer to page 23 and enter the installer menu. Installer menu screen Press button, for move to “ ”. If Bluetooth is connected, performing field Field Setting setting from the remote controller side is impossible.
  • Page 27 Sub-menu screen Press button, scroll to the desired Unit Mode 20 Mode 20 No. and then press  button to set the Unit 00 Unit 00 selection. Enter Return Text mode Icon mode Sub-menu screen Press button, to select “Enter” or “ ”, Mode 20 Mode 20...
  • Page 28 Sub-menu screen Press button, to scroll to the desired SW 00 SW 00 Second Code No., and then press button. – 01 – 01 Cancel Text mode Icon mode Sub-menu screen Press button, select “Set” or “ ”, and SW 00 SW 00 then press  button to save the setting and...
  • Page 29 NOTICE • Installation of optional accessories on the indoor unit may require changes to field settings. See the manual of the optional accessory. • For field setting details related to the indoor unit, see installation manual shipped with the indoor unit.

  • Page 30: R/C Setting

    R/C Setting R/C setting method This section describes how to perform R/C setting. Refer to page 23 and enter the installer menu. Installer menu screen Press button, move to “ ”. If Bluetooth is connected, performing field R/C Setting setting from the remote controller side is impossible.
  • Page 31 Sub-menu screen Press button, select First Code No., SW 03 SW 03 and then press  button. – 00 – 00 a First Code No. b Second Code No. Cancel Text mode Icon mode Sub-menu screen Press button, scroll to the desired First SW 13 SW 13 code No.
  • Page 32 Sub-menu screen Press button, select “Set” or “ ”, and SW 13 SW 13 then press button to save the setting and – 00 – 00 return to the previous screen. If the setting is not changed, select “Cancel” or Cancel “...
  • Page 33 (Items in bold are factory default settings) Code Description Text home Icon home Remote controller type — — — screen screen Normal Daikin Eye lighting settings Error continuously — — — during error blinking Enable and disable BLE Disabled Enabled —...

  • Page 34: Installer Password Setting

    Installer Password Setting Installer password setting method This section describes how to perform password setting. Refer to page 23 and enter the installer menu. Installer menu screen Press button, for move to “ ”. If Bluetooth is connected, performing field Installer Password setting from the remote controller side is impossible.

  • Page 35: Other Service Settings

    Sub-menu screen Press button, set any password, and Enable then press button. 0 0 0 0 0 0 0 0 Each time button is pressed, the digit place will change. When the 4th digit on the right end Cancel is reached, press button to return to the Text mode Icon mode...

  • Page 36: Certification

    Certification COMPLIANCE WITH FCC RULES AND REGULATIONS 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

  • Page 37: License

    License The following OSS is included in the remote controller. [micro-ecc] Copyright (c) 2014, Kenneth MacKay All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 38 EM19A026 [2009] HT...

Table of Contents