About The Setpoint - Daikin Madoka BRC1H519W7 Installer And User Reference Manual

13.3.1 About the setpoint

Home screen setpoint: Numerical
Home screen setpoint: Symbolic
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
Depending on configuration, the home screen displays the temperature setpoint
either as a numerical value, or as a symbol.
INFORMATION
For how to set the home screen setpoint, see the Madoka Assistant app. Also see
4
"Screen" [ 103].
In case the home screen displays the temperature setpoint as a numerical value,
you control the room temperature by raising or lowering the setpoint by 1°C
increments.
The default setpoint range is 16°C~32°C. If any limitations are set to this range with
the setpoint range function (Madoka Assistant app function; see
4
range" [ 111]), it is only possible to raise or lower the setpoint up/down to the set
maximum/minimum setpoint range limits.
In case the home screen displays the temperature setpoint as a symbol, you
control the room temperature by raising or lowering the setpoint in relation to the
"reference setpoint" (visually indicated by the marker in the middle of the
thermometer).
It is possible to raise the setpoint up to three steps of 1°C above and up to three
steps of 1°C below the reference setpoint.
Example: if the reference setpoint is 25°C, it is possible to raise the setpoint to
28°C and lower it to 22°C.
28°C
+3°C
25°C
-3°C
22°C
INFORMATION
For how to set the reference setpoint, see the Madoka Assistant app. Also see
4
"Screen" [ 103].
Exceptions to this logic are possible in case of:
▪ Setpoint range limitations
▪ Central control / control by a schedule
13 Operation
|
"Setpoint
Installer and user reference guide
55