Page 1
Installer and user reference guide Wired remote controller BRC1H51W Installer and user reference guide BRC1H51K English Wired remote controller BRC1H51S...
Buttons ..................11 INFORMATION 12.2 Screen ..................12 Also see the operation manual delivered with the outdoor 12.3 Status indicator................12 and indoor unit. 12.4 Information ................12 Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
▪ In places with temperatures <–10°C and >50°C. Daikin website (publicly accessible). ▪ In places where the relative humidity is >95%. ▪ The full set of latest technical data is available on the Daikin extranet (authentication required). BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 –...
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and use of such marks by Daikin Europe N.V. is under license. Other trademarks and trade names are those of their respective owners. Installer and user reference guide...
"6.4.1 Ventilation mode" on page 7 respectively. Air Clean. In this mode, the optional air cleaning unit ▪ Most icons are related to things set in the Daikin operates. Control Assistant app. For more information, see the app.
To ensure a smooth start, do not turn off the system while it is operating. 6.2.2 To set the operation mode 1 Navigate to the operation mode menu. 2 Use to adjust the airflow direction. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
1 Navigate to the fan speed menu. 3 Press to activate. Result: The heat reclaim ventilation unit changes its operation mode and the controller returns to the home screen. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Daikin Control Assistant app. 6.5.1 To make a Bluetooth connection Prerequisite: You have a mobile device on which the Daikin Control Assistant app is installed and running. Prerequisite: Your mobile device supports Bluetooth version 4.2. 1 Open the Daikin Control Assistant app and follow the instructions from there.
Determining how you want to route the electrical wiring, and nipping away a piece of the rear casing accordingly. Mounting the rear casing to the wall. Connecting the electrical wiring. Closing the controller. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
To close the controller 1 Click the front of the controller into the rear casing. From the rear P1P2 2 When the installation site is dust‑free, peel off the protective seal. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
For a second controller to get designated as slave controller, manual action is required. For instructions, see "11.2 To designate a controller as slave" on page 11. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
To turn ON the backlight, a Software version press shortly. For instructions on how to set screen brightness and contrast when the backlight is ON, see "13.1.2 Screen settings" on page 13. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Prerequisite: You are in the installer menu. Screen settings Brightness 1 Navigate to the screen brightness menu. Contrast Status indicator settings Intensity 2 Use to adjust screen brightness. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
The field settings menus have two levels. You set modes and units in the first level, and settings and values in the second. Prerequisite: You are in the installer menu. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Page 15
In the field settings tables, find the available values for each setting in the "Value" column. Navigation 1 Use to move the highlighter. To navigate through the field settings menus, use , and BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Page 16
6 In the second level, navigate and select in the same way as you did in the first level. 7 Select to confirm and activate made settings. SW 00 8 At all times, select to go back a level. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Page 17
▪ Field setting default values are different depending on the indoor unit model. For more information, see the service manual of the indoor units. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Page 18
Warning ON (when the backlight goes into faint state, the status indicator turns OFF) Setting of status indicator intensity Pairing with indoor unit Blinking Blinking Blinking EEPROM initialisation Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Define an address for the indoor/outdoor unit. To SET an address, make sure is selected. Apply settings. To RELEASE an address that was previously set, change and then apply settings. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Page 20
Define the indoor unit for which you want to set an AirNet address. Proceed to the next level. Outdoor unit (O/U) Define the outdoor unit for which you want to set an AirNet address. Proceed to the next level. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Page 21
Default value B2 Delay Timer Timer that starts from as soon the 0-10 minutes "1 min" key card is removed. The unit continues normal operation until the timer expires. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Page 22
Contact closed (key card IN) — Unit operation is forced off: ▪ No delay reset timer functionality. ▪ Not possible to turn on/off the unit with the controller's ON/OFF button. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Page 23
Force fan ON allows you to force fan operation of individual indoor forced off (see "Window contact logic" on page 22). units. In this way, you can check which indoor unit number was assigned to which indoor unit. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Page 24
Result: All slave controllers display the "changeover under Outdoor unit centralised control" icon. Indoor unit Remote controller To release Cooling/Heating masterhood BS unit Prerequisite: You are in the installer menu. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
Page 25
To read out information Prerequisite: You are in the installer menu. 1 Navigate to the information menu. 2 Read out information. 3 Press to go to the second page. BRC1H51W+K+S Installer and user reference guide Wired remote controller 4P513689-1 – 2018.02...
Afterwards, wipe dry with a dry cloth. screen. For an overview of indoor unit error codes and what they mean, see the documentation of the indoor units. Installer and user reference guide BRC1H51W+K+S Wired remote controller 4P513689-1 – 2018.02...
16 Technical data Technical data A subset of the latest technical data is available on the regional Daikin website (publicly accessible). The full set of latest technical data is available on the Daikin extranet (authentication required). 16.1 Connection diagram 16.1.1...