Individual Airflow Direction - Daikin Madoka BRC1H519W7 Installer And User Reference Manual

15 | About the app

15.5.19 Individual airflow direction

Installer and user reference guide
110
Settings
Cooling Cooling
operation setback
setpoint
Cooling
recovery
differential
INFORMATION
▪
Setback is by default enabled.
▪
Setback turns on the system for at least 30 minutes, unless the setback setpoint is
changed, or the system is turned on with the ON/OFF button.
▪
When Setback is active, you cannot make changes to fan speed settings.
▪
When Setback activates while the system is set to Auto operation mode, the
system will switch to Cooling or Heating operation mode, depending on which is
required. The Setback setpoint displayed on the operation screen is then
according to the operation mode.
▪
When Setback is active and the "Home screen setpoint" setting is set to
"Symbolic", then there is no indication of Setback operation on the remote
controller home screen.
INFORMATION
This function cannot be used when the indoor units are controlled by a centralised
controller.
INFORMATION
The default setpoint range limits for Setback operation are [33°C-37°C] for Cooling
operation, and [10°C-15°C] for Heating operation. It is not possible to change these
limits.
Set the airflow direction of each individual indoor unit air outlet. The maximum
number of indoor units for which you can make these settings depends on the type
of system:
System
Sky Air
VRV
Of cassette-type indoor units, it is possible to identify the individual air outlets by
way of the following indicators:
35°C If the room temperature rises above
35°C, the system automatically starts
cooling operation. If after 30 minutes
the temperature drops below 33°C, the
–2°C
system stops cooling operation, and
turns off again. When the room
temperature rises above 35°C again, the
process gets repeated.
Maximum number of indoor units
Result
4
16
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12