15
|
About the app
15.5.32 Filter auto clean
15.5.33 Filter notifications
15.5.34 AirNet address
15.5.35 Group address
Installer and user reference guide
116
INFORMATION
To use this function, it is required that the indoor units are equipped with a self-
cleaning decoration panel (optional accessory).
Enable automatic indoor unit filter cleaning operation and set a timespan for it.
Reset dustbox maintenance timer
When it is time to empty the self-cleaning decoration panel's dustbox, the app
displays a notification in the operation screen. Empty the dustbox and reset the
notification.
Dismiss notification
The app displays a notification in the operation screen when it is time to perform
one of the following filter-related maintenance activities:
▪
Replacement of indoor unit filter.
▪
Cleaning of indoor unit filter.
▪
Cleaning of indoor unit element.
Perform the required maintenance, then dismiss the notification.
INFORMATION
For more information on indoor unit maintenance, see the operation manual of the
indoor unit.
Reset notification timer
Filter maintenance due time is controlled by timers. The app sends out a
maintenance notification each time a timer expires. It is possible to reset these
timers.
INFORMATION
To use this function, it is required that you use the app in installer mode. For
instructions on how to activate installer mode, see
Assign AirNet addresses to the indoor and outdoor units, this to connect the
system to the AirNet monitoring and diagnostics system. First select a unit by way
of its unit number, then assign it an AirNet address.
Assign addresses to the indoor units, this to control the system with central control
equipment. You can assign an address to the group of indoor units connected to
the controller, and to indoor units individually.
4
"Installer
mode" [
98].
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12