10
|
Installation
10.5 Opening the controller
10.5.1 Precautions when opening the controller
10.5.2 To open the controller
Installer and user reference guide
40
2 When the installation site is dust‑free, peel off the protective seal.
NOTICE
The controller PCB is mounted into the front casing. When opening the controller, be
careful not to damage the PCB.
NOTICE
When the front and rear casing are separated, make sure the PCB does not come
into contact with dust or moisture.
1 Insert a flat‑head screwdriver into one of the bottom closing mechanisms and
slowly twist it.
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12