Setpoint Logic - Daikin Madoka BRC1H519W7 Installer And User Reference Manual

15 | About the app

15.5.17 Setpoint logic

Installer and user reference guide
108
INFORMATION
For more information, see "Schedule" [
Set up the setpoint logic. Choose whether the setpoint logic is executed by the
indoor unit, or by the remote controller.

Setpoint logic

Indoor unit
Remote controller
In case of remote controller setpoint logic, choose whether to have single setpoint
logic, or dual setpoint logic.
Remote controller setpoint logic
Single setpoint
Dual setpoint
In case of dual setpoint logic, set the Minimum setpoint differential. This is the
minimum difference between the possible setpoints for Cooling and Heating
operation:
▪ Cooling setpoint ≥ (Heating setpoint + Minimum setpoint differential)
▪ Heating setpoint ≤ (Cooling setpoint – Minimum setpoint differential)
This means that:
▪ If you lower the Cooling setpoint < (Heating setpoint + Minimum setpoint
differential), then the controller will automatically lower the Heating setpoint.
▪ If you raise the Heating setpoint > (Cooling setpoint – Minimum setpoint
differential), then the controller will automatically raise the Cooling setpoint.
4
107].
Description
The setpoint logic is executed by the
indoor unit.
The setpoint logic is executed by the
remote controller.
Description
There is only one temperature setpoint,
independent of the operation mode. If
this is the case, changing the operation
mode does NOT change the setpoint. Or
the other way around, if you change the
setpoint, you do so for both Cooling and
Heating operation.
There are two temperature setpoints:
one specifically for Cooling operation,
and one specifically for Heating
operation. If this is the case, changing
the operation mode DOES change the
setpoint (i.e. to the setpoint of the other
operation mode). Or the other way
around, if you change the Cooling
setpoint, you do NOT change the
Heating setpoint.
Madoka wired remote controller
BRC1H519W+K+S7
4P513689-1E – 2020.12