About The Setpoint; To Set The Setpoint; Date And Time; About Date And Time - Daikin BRC1H81W Installer And User Reference Manual

6.2.1

About the setpoint

The setpoint that is displayed on the home screen depends on ON/
OFF status, and on whether Setback is enabled:
When ...
... the system is turned ON
... the system is turned OFF, and
Setback is disabled
... the system is turned OFF, and
Setback is enabled
For information about Setback, see
6.2.2

To set the setpoint

Prerequisite: The active operation mode is either 'Cooling',
'Heating', or 'Auto'.
1 In the home screen, use
Result: The indoor unit changes its temperature setpoint.
6.3

Date and time

Set the date and time for the indoor units connected to the controller.
6.3.1

About date and time

Depending on daylight saving time settings, the date and time menu
has the following daylight saving time indicators:
Summer time
Winter time
For more information, see "Indoor unit field settings" on page 18
(remote controller settings) and
(app settings).
6.3.2

To set date and time

1 Navigate to the date and time menu.
2 Press to activate .
Result: The fields become editable.
BRC1H81W+K+S
Wired remote controller
4P513690-1 – 2018.03
then ...
... the home screen displays the
regular temperature setpoint.
... the home screen displays the
regular temperature setpoint.
... the home screen displays the
Setback temperature setpoint.
"15.5.11 Setback" on page 30.
and to adjust the setpoint.
"15.5.7 Date and time" on page 30
3 Set the date and time. Set with
Cycle through the menu until all fields are set correctly.
Result: You set the date and the time.
INFORMATION
Confirming the value in a field will automatically bring you
to the next field. To finish making settings and leave the
menu, navigate to and confirm the value in the last field.
6.4

Airflow

6.4.1

Airflow direction

The airflow direction is the direction in which the indoor unit blows its
air.
About airflow direction
The following airflow directions can be set:
Direction
Fixed position. The indoor unit
blows air in 1 of 5 fixed positions.
Swing. The indoor unit alternates
between the 5 positions.
Auto. The indoor unit adjusts its
airflow direction according to
movement sensed by a
movement sensor.
INFORMATION
▪ Depending on the type of indoor unit, and/or on system
layout and organisation, Auto airflow direction may not
be available.
▪ For some types of indoor unit, you cannot set the
airflow direction.
Automatic airflow control
In the following operating conditions, the airflow direction of the
indoor units is controlled automatically:
▪ When the room temperature is higher than the controller's setpoint
for Heating operation (including Auto operation).
▪ When the indoor units run in Heating operation mode, and the
Defrost function is active.
▪ When the indoor units run in Continuous operation, and the airflow
direction is Horizontal.
To set the airflow direction
1 Navigate to the airflow direction menu.
6 Operation
and . Confirm with .
Screen
Installer and user reference guide
7